Slice Settings

Download the STL file and import it into your 3D printing slicing software. You'll need to adjust your settings accordingly if you're using material different than PLA.

230C Extruder Temp
No heated bed (65C for heated)
100% Extrusion Multiplier
.6mm Nozzle
0.72 Extrusion Width
.4mm Layer Height
20% infill
4 to 6 skirt outlines (brim)
No Raft or Supports

CAD Model

The deck was designed in Autodesk Fusion 360. You can download the source file and modify the design to make a custom board. The STL file is available to download if you want to print "as is" without any modifications.

Download the Fusion360 source

Download from Thingiverse

Download from Youmagine

Download from Pinshape

This guide was first published on Aug 02, 2017. It was last updated on Jul 30, 2017.

This page (3D Printing) was last updated on Jul 30, 2017.

Text editor powered by tinymce.

Search