Build an LED ornament inspired by Spiderman's Green goblin!
Use the built-in LEDs on the Circuit Playground Bluefruit and an additional NeoPixel ring on the back to illuminate on both sides of the ornament!
The 3D printed shell fits over our 6cm DIY ornament with a printed mount to hold the Circuit Playground Bluefruit and 16 NeoPixel ring.
Use CircuitPython to easy edit the color, animations or even motion or add sounds with the build-in speaker on the Circuit Playground Bluefruit!
Easily power up the Ornament with an Adafruit Micro-Lipo Charger!
Simply plug it via USB cable into a USB port and our lipo rechargeable battery into the JST plug on the other end. There are two LEDs - one red and one green. While charging, the red LED is lit. When the battery is fully charged and ready for use, the green LED turns on. Seriously, it could not get more easy!
The Circuit Playground Bluefruit is powered by a 500mah battery.
Components snap fit on to a 3D printed mount. The mount press fits into a 6cm plastic ornament. Printed outer shells attach to each half of the ornament.