Install GPS FeatherWing

We'll need four M2.5 x 5mm flat head metric machine screws. Place the GPS FeatherWing PCB over the four standoffs on the case (the orientation needs to match the photo). Hold the PCB in place while driving the machine screws into the standoffs.

gps-screws.jpg

gps-fitting.jpg

gps-screw-install.jpg

Secured GPS FeatherWing

The PCB should be flush with the standoffs. Double check to ensure the PCB is in the correct orientation.

This guide was first published on Nov 27, 2018. It was last updated on Nov 27, 2018.

This page (Install GPS) was last updated on Nov 16, 2018.

Text editor powered by tinymce.