Download the vector files using the button below!

Laser cut on clear cast acrylic up to 3.25mm thickness, using your laser's appropriate engrave and cut settings. These were cut with a Glowforge using the Medium Clear Acrylic proofgrade setting. 

Tip: it would be good practice to ensure that the letter/shape engraves are done first, followed by the mounting hole cuts, and then finally the outer outline cuts. 

You can choose to peel the masking on one (or all) of the pieces, and do a quick test fit on the 3D printed frame to see if any adjustments are needed.

This guide was first published on Nov 10, 2021. It was last updated on 2021-11-10 13:47:15 -0500.

This page (Laser Cutting) was last updated on Nov 10, 2021.

Text editor powered by tinymce.