Wear 'em!

Enjoy your new glowing headphones! Keep your volume down if you want to hear the compliments you'll get from passers-by.

To charge the battery or change the animations, you'll need to re-open the earphone containing the FLORA main board. Make sure your tactile switch is set to ON when charging the battery.
You can see that there's slightly less diffusion from the earphone containing the bulk of the electronics.

If your headphones have a LOT of room inside them, you could add an audio amplifier to the headphone input and make the animations sound-reactive!
This guide was first published on Aug 14, 2013. It was last updated on Aug 14, 2013. This page (Wear 'em!) was last updated on Aug 17, 2019.