Light up the night and relax on a comfortable seat you can easy take to your next night out by the fire. 

These super bright NeoPixel LEDs let you change colors and animations with the Adafruit Bluefruit Connect LE app. This customizable 3D printed design can easily hold up to 200 lbs of weight.

All of the electronics are mounted inside and on the bottom of the seat with plenty of room to add custom parts to the design.

Prerequisite Guides

We suggest walking through the following tutorials to get a better understanding of NeoPixel LEDs and soldering.

• Collin's Lab: Soldering
• Adafruit NeoPixel Uber Guide
• Adafruit PowerBoost 1000C

Parts, Tools and Supplies

You'll need the following tools, parts and supplies to complete this build.

• 4x 1/4 60 Ring (4 make a full circle)
• 2000mAh Lithium Ion Polymer Battery
• Adafruit Feather 32u4 Bluefruit LE
• 7/8 inch Dowel
• Silicone wires
• soldering iron and solder
• wire strippers
• diagonal flush snips
• helping third hand tool
• Panavise
• 4x M2.5x.5x5mm phillips flat head screws