The controller may be housed in a 3D printed case, described below. The case consists of three parts: a top lid, a board case and a paper airplane holder. All parts print with no supports.

The STL files can be downloaded directly here or from Thingiverse.

The nRF52840 LED Glasses Driver mounts to the board case using M2 screws and stand-offs.

The paper airplane holder has a slot for your paper airplane to sit in. 

The paper airplane holder has mounting holes to attach to the board case.

This guide was first published on Apr 19, 2022. It was last updated on Oct 06, 2023.

This page (3D Printing) was last updated on Apr 14, 2022.

Text editor powered by tinymce.