- Setting up a cross-compiling toolchain for ARM
- Creating and compiling your first blinky program
- Programming the LPC810 using free and open source tools
The LPC810 is a new microcontroller from NXP, a super fast little controller has only 8 pins but packs a lot of punch with a high speed processor and 32 bit instructions. This learning guide will show you everything you need to know to get started with the ARM Cortex M0+ based LPC810 microcontroller. It will cover:This guide was first published on May 24, 2013. It was last updated on May 24, 2013. This page (Introduction) was last updated on May 04, 2015.