Code

Save Subscribe
biometric_Screen_Shot_2016-01-26_at_2.52.17_PM.png

This sensor provides an analog signal that can be read by the analog input on your microcontrol, just like many of the common sensors you might use.

Simply open up Arduino and go to File -> Examples -> 01.Basics -> AnalogReadSerial. Then upload this code to your Feather board.

biometric_MyoWareMuscleSensor_AnalogReadSerial.png
 Circuit Placing Electrodes 

This guide was first published on Jan 27, 2016. It was last updated on Jan 27, 2016.

This page (Code) was last updated on Jan 21, 2016.

Text editor powered by tinymce.