Attach M2.5 standoffs to the mounting holes with M2.5 screws.

Secure the Feather ESP32-S2 TFT and BME688 STEMMA board to the standoffs with M2.5 screws.

Connect the BME688 to the Feather ESP32-S2 TFT with a STEMMA QT cable.

Insert a battery into the battery slot. Plug the battery into the Feather ESP32-S2 TFT's JST battery plug.

Place the battery cover over the battery, sliding the battery's wire through the cover's slot. That completes the assembly!

This guide was first published on Jul 05, 2022. It was last updated on Oct 06, 2023.

This page (Assembly) was last updated on Jun 01, 2022.

Text editor powered by tinymce.