The project may be mounted on a 3D printed stand, described below. The stand consists of two parts: the Feather mounting stand and the battery cover. Both parts print with no supports.

The STL files can be downloaded directly here.

The Feather mounting stand has mounting holes for the Feather ESP32-S2 TFT and the BME688 STEMMA board.

The stand has a jaunty angle for better viewing of the Feather's TFT screen.

Behind the mounting board is a slot for a battery to sit. The battery lid fits loosely over the slot and has a cutout for the battery wire.

This guide was first published on Jul 05, 2022. It was last updated on Mar 27, 2024.

This page (3D Printing) was last updated on Mar 08, 2024.

Text editor powered by tinymce.