The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the size of a quarter, with friendly alligator-clip sew pads. But do not be fooled! The Gemma M0 is incredibly...

Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can...

Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 150mAh for a total of about 0.6 Wh. If you need a larger battery,

Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V lithium polymer or lithium ion rechargeable battery into the JST plug on the other end. There are...

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA M0, four sewable bright RGB pixels, a battery holder (coin cell batteries not included), 2-ply conductive thread, alligator clips to help you test...

Go interactive with sensors and Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic sensing project (or two). There's a GEMMA board, four sewable bright RGB pixels, a motion sensor, a switch, a light sensor, a piezo, a rechargeable battery and...

Make your wearables glow with the GEMMA sequin pack! This GEMMA parts pack makes it easy to add light to your wearables. It comes with thread, needles, a holder for 2 x CR2032 coin cell batteries, a GEMMA sewable microcontroller, and warm white Adafruit LED Sequins. This pack...