NeoPixel Wiring
IN end
- Female 3-pin JST connector wired to the 3 pads on the front
- Female 2-pin JST connector wired to +5v and G on the back
OUT end
- Male 3-pin JST connector wired to the 3 pads, oriented to match the female 3-pin connector
Feather Wiring
- Male 3-pin JST connector wired to BAT, 13 and G. Plug it into the female JST on the NeoPixels before soldering, to make sure the orientation is correct.
DC Power Wiring
- Male 2-pin JST connector: plug in to the NeoPixel 2-pin connector and align +5v side with +, and G side with -
Text editor powered by tinymce.
