Schematic is basically the same as the Dropout Design version, except LEDs are now common cathod and a button has been added. The board layout was redone to allow using right angle headers and to make assembly a little easier.
Schematic and layout files are at GitHub (CC 2.5 SA-BY) Click Download Source to grab them.
The v1.3 firmware, based heavily on the Dropout Design code. Added:
- Supports a On/Off/Reset button
- Auto-reset on static-image
- Slightly slower delay between steps
- LEDs are common cathode
Download from GitHub, released under GPL. Click Download Source to grab them.