Remove the screws from Furby's face.
Peel off the capacitive touch sensors. There's one along the back and one on the top of Furby's head.
Remove the screws from the back panel.
You will need to cut the "fur brackets" at the ears to allow the back panel to release from Furby's body.
Both sides need to be free before the back panel will release.
Cut the tabs holding on the face "fur bracket."
After cutting the tabs, the fur bracket on the face will come off.
Last updated on 2014-04-23 at 02.39.11 PM
Published on 2012-11-14 at 11.56.35 PM
