Use the FunHouse and an ultrasonic distance sensor to assist you when parking your vehicle in your garage or other permanent parking space.

This project uses the FunHouse to read a distance sensor and then guide the driver with colored LEDs and sounds!

Parts

Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland....
Out of Stock
Plug in and glow, this Adafruit NeoPixel LED Strip with JST PH Connector has 30 total LEDs in a "60 LED per meter" spacing,...
$12.50
In Stock
If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic...
$3.95
In Stock
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" female header sockets on the end. We're carrying these to match up with...
$1.25
In Stock
The official Raspberry Pi USB-C power supply is here! And of course, we have 'em in classic Adafruit black! Super fast with just the right amount of cable length to get your Pi 4...
$7.95
In Stock

Optional

These female-female jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of...
$1.95
In Stock
Got a glorious RGB Matrix project you want to mount and display in your workspace or home? If you have one of the matrix panels listed below, you'll need a pack of these...
$2.50
In Stock

This guide was first published on Jun 02, 2021. It was last updated on 2021-06-02 09:57:42 -0400.

This page (Overview) was last updated on Jun 08, 2021.

Text editor powered by tinymce.