Top-down video of Adafruit Funhouse PCB. The TFT display shows a data readout, and the NeoPixel LEDs glow rainbow colors.
Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland....
guides with product
$34.95
In Stock
Top view of magnetic contact switch with three screws.
This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When...
$3.95
In Stock
Angled shot of STEMMA JST PH 3-Pin to Male Header Cable - 200mm.
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our...
$1.25
In Stock
2-Pin Wire Joints connecting two sets of power wires
These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you...
Out of Stock
USB Type A to Type C Cable - approx 1 meter / 3 ft long
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
5V 2A Switching Power Supply with  USB-A Connector
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!This adapter was...
$7.95
In Stock