# Funhouse Door Alert with Email Notification

## Overview

https://youtu.be/RVE28GaaxKI

Create a simple door alert system with the Funhouse and Adafruit IO. It'll update your dashboard and send an email whenever a certain door is opened or closed.

## Parts
### Adafruit FunHouse - WiFi Home Automation Development Board

[Adafruit FunHouse - WiFi Home Automation Development Board](https://www.adafruit.com/product/4985)
Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when...

Out of Stock
[Buy Now](https://www.adafruit.com/product/4985)
[Related Guides to the Product](https://learn.adafruit.com/products/4985/guides)
![Top-down video of Adafruit Funhouse PCB. The TFT display shows a data readout, and the NeoPixel LEDs glow rainbow colors.](https://cdn-shop.adafruit.com/product-videos/640x480/4985-00.jpg)

### Magnetic contact switch (door sensor)

[Magnetic contact switch (door sensor)](https://www.adafruit.com/product/375)
This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When the magnet is less than 13mm (0.5") away, the reed switch closes. They're often used to detect when a...

In Stock
[Buy Now](https://www.adafruit.com/product/375)
[Related Guides to the Product](https://learn.adafruit.com/products/375/guides)
![Top view of magnetic contact switch with three screws.](https://cdn-shop.adafruit.com/640x480/375-01.jpg)

### STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm

[STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm](https://www.adafruit.com/product/3893)
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs - and the wires are even color coded!

<a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/3893)
[Related Guides to the Product](https://learn.adafruit.com/products/3893/guides)
![Angled shot of STEMMA JST PH 3-Pin to Male Header Cable - 200mm.](https://cdn-shop.adafruit.com/640x480/3893-03.jpg)

### 2-Pin Wire Joints (3-pack)

[2-Pin Wire Joints (3-pack)](https://www.adafruit.com/product/3786)
These are the _easiest_ way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously folks! OK, so despite...

In Stock
[Buy Now](https://www.adafruit.com/product/3786)
[Related Guides to the Product](https://learn.adafruit.com/products/3786/guides)
![2-Pin Wire Joints connecting two sets of power wires](https://cdn-shop.adafruit.com/640x480/3786-02.jpg)

### USB Type A to Type C Cable - approx 1 meter / 3 ft long

[USB Type A to Type C Cable - approx 1 meter / 3 ft long](https://www.adafruit.com/product/4474)
As technology changes and adapts, so does Adafruit. This&nbsp;&nbsp; **USB Type A to Type C** cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.

USB C is the latest industry-standard connector for...

In Stock
[Buy Now](https://www.adafruit.com/product/4474)
[Related Guides to the Product](https://learn.adafruit.com/products/4474/guides)
![Angled shot of a coiled black, USB-C to USB-A cable.](https://cdn-shop.adafruit.com/640x480/4474-02.jpg)

### 5V 2A Switching Power Supply w/ USB-A Connector

[5V 2A Switching Power Supply w/ USB-A Connector](https://www.adafruit.com/product/1994)
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!

This adapter was specifically designed to provide 5.25V, not 5V, but we still call it a 5V USB adapter. We did this on purpose to...

In Stock
[Buy Now](https://www.adafruit.com/product/1994)
[Related Guides to the Product](https://learn.adafruit.com/products/1994/guides)
![5V 2A Switching Power Supply with  USB-A Connector](https://cdn-shop.adafruit.com/640x480/1994-01.jpg)

- [Next Page](https://learn.adafruit.com/funhouse-door-alert-email-notification/adafruit-io-setup-2.md)

## Featured Products

### Adafruit FunHouse - WiFi Home Automation Development Board

[Adafruit FunHouse - WiFi Home Automation Development Board](https://www.adafruit.com/product/4985)
Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland. Whether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when...

Out of Stock
[Buy Now](https://www.adafruit.com/product/4985)
[Related Guides to the Product](https://learn.adafruit.com/products/4985/guides)
### Magnetic contact switch (door sensor)

[Magnetic contact switch (door sensor)](https://www.adafruit.com/product/375)
This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When the magnet is less than 13mm (0.5") away, the reed switch closes. They're often used to detect when a...

In Stock
[Buy Now](https://www.adafruit.com/product/375)
[Related Guides to the Product](https://learn.adafruit.com/products/375/guides)
### STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm

[STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm](https://www.adafruit.com/product/3893)
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs - and the wires are even color coded!

<a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/3893)
[Related Guides to the Product](https://learn.adafruit.com/products/3893/guides)
### 2-Pin Wire Joints (3-pack)

[2-Pin Wire Joints (3-pack)](https://www.adafruit.com/product/3786)
These are the _easiest_ way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously folks! OK, so despite...

In Stock
[Buy Now](https://www.adafruit.com/product/3786)
[Related Guides to the Product](https://learn.adafruit.com/products/3786/guides)
### USB Type A to Type C Cable - approx 1 meter / 3 ft long

[USB Type A to Type C Cable - approx 1 meter / 3 ft long](https://www.adafruit.com/product/4474)
As technology changes and adapts, so does Adafruit. This&nbsp;&nbsp; **USB Type A to Type C** cable will help you with the transition to USB C, even if you're still totin' around a USB Type A hub, computer or laptop.

USB C is the latest industry-standard connector for...

In Stock
[Buy Now](https://www.adafruit.com/product/4474)
[Related Guides to the Product](https://learn.adafruit.com/products/4474/guides)
### 5V 2A Switching Power Supply w/ USB-A Connector

[5V 2A Switching Power Supply w/ USB-A Connector](https://www.adafruit.com/product/1994)
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone, or anything else that's power-hungry!

This adapter was specifically designed to provide 5.25V, not 5V, but we still call it a 5V USB adapter. We did this on purpose to...

In Stock
[Buy Now](https://www.adafruit.com/product/1994)
[Related Guides to the Product](https://learn.adafruit.com/products/1994/guides)

## Related Guides

- [Adafruit FunHouse](https://learn.adafruit.com/adafruit-funhouse.md)
- [No-Code WipperSnapper Water Detection](https://learn.adafruit.com/water-detection-with-wippersnapper.md)
- [FunHouse IoT Fume Extractor and Air Quality Sensor](https://learn.adafruit.com/funhouse-fume-extractor-iot-air-quality-sensor.md)
- [CircuitPython Web Workflow Code Editor Quick Start](https://learn.adafruit.com/getting-started-with-web-workflow-using-the-code-editor.md)
- [Track a Turtle with WipperSnapper](https://learn.adafruit.com/track-a-turtle-with-wippersnapper.md)
- [No-Code WipperSnapper Action Counter](https://learn.adafruit.com/no-code-wippersnapper-action-counter.md)
- [No-Code WipperSnapper IoT Power Switch Outlet](https://learn.adafruit.com/no-code-wippersnapper-iot-power-switch-outlet.md)
- [Karel The Robot In CircuitPython](https://learn.adafruit.com/karel-the-robot-in-circuitpython.md)
- [FunHouse Motion Detecting Lights with LIFX Bulbs](https://learn.adafruit.com/funhouse-motion-detecting-lighting-for-lifx-bulbs.md)
- [Hang out your washing reminder - Adafruit IO + Vibration switch](https://learn.adafruit.com/hang-out-your-washing-reminder-adafruit-io-vibration-switch.md)
- [No-Code Room Occupancy Status ](https://learn.adafruit.com/no-code-room-occupancy-status.md)
- [FunHouse Parking Assistant](https://learn.adafruit.com/funhouse-parking-assistant.md)
- [Motion Activated Outlet with the Adafruit FunHouse](https://learn.adafruit.com/motion-activated-outlet-with-the-adafruit-funhouse.md)
- [Pet Bowl Water Level Sensing](https://learn.adafruit.com/pet-bowl-water-level-sensing-with-the-funhouse-and-home-assistant.md)
- [Creating FunHouse Projects with CircuitPython](https://learn.adafruit.com/creating-funhouse-projects-with-circuitpython.md)
