Create a simple door alert system with the Funhouse and Adafruit IO. It'll update your dashboard and send an email whenever a certain door is opened or closed.

Parts

Home is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland....
Out of Stock
This sensor is essentially a reed switch, encased in an ABS plastic shell. Normally the reed is 'open' (no connection between the two wires). The other half is a magnet. When...
$3.95
In Stock
This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our...
$1.25
In Stock
These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you...
$0.95
In Stock
As technology changes and adapts, so does Adafruit. This  USB Type A to Type C cable will help you with the transition to USB C, even if you're still...
$4.95
In Stock
Our 5V 2A USB power adapter is the perfect choice for powering single-board computers like Raspberry Pi, BeagleBone or anything else that's power hungry!This adapter was...
$7.95
In Stock

This guide was first published on Apr 21, 2021. It was last updated on Apr 21, 2021.

This page (Overview) was last updated on Apr 21, 2021.

Text editor powered by tinymce.