You can 3D print all of the parts for this project. They are designed to be connected together with M3 screws.
The STL files can be downloaded directly below or from Printables. There are two versions: 3D printed only and wood veneer.
The case has cutouts for the PDM mic, DVI port, USB-C port, step switches and potentiometer. Everything is secured with M2.5 or M3 screws. The stand-offs help to stabilize the perma-proto board. The Fruit Jam logo is embossed on both sides of the case.
If you want to go the extra mile, you can cut some walnut veneer to cover the lid and add a Fruit Jam logo inlay on either side of the enclosure. E6000 glue is recommended for securing the pieces in place. It turns to a gummy texture when it's dry, so you can easily clean-up any wayward streaks unlike super glue.
Page last edited September 30, 2025
Text editor powered by tinymce.
