Case
You can print or purchase the optional Fruit Jam case. To print, check out this guide.
Optional Logo
If you'd like to you can 3D print a logo for your Fruit Jam case from the file linked here. Either print with dual materials or print single color and paint in the letters, then adhere it to the case with double-stick tape or CA glue.
Prep
To prep for play, fit the Fruit Jam into the case bottom. Plug in the optional speaker for on-board sound.
Feed the on-off switch into the slot on front of the case, then snap the top down.
Plug in the following:
- Fruit Jam USB C Power & Data port to USB C power adapter
- Fruit Jam DVI-D Video Output to monitor/TV HDMI input via HDMI cable
- Fruit Jam Stereo Headphone output to headphones or powered speakers via 3.5mm stereo TRS cable
- USB gamepad to Fruit Jam USB 1 or USB 2 port (some controllers seem to prefer port 2)
- Insert the micro SD card (with the Fruit Jam power off)
Classic Controllers
For two player games, you can optionally plug in a Wii/NES/SNES Classic Controller.
With the Fruit Jam powered off, plug in a STEMMA QT cable to the Fruit Jam STEMMA QT port. Then plug in the Adafruit Nunchuck Breakout Adapter.
Plug your Nintendo controller into the adapter.
Now, when you select "2 Player" in most games the second player will default to the I2C controller.
Classic Controller Only Support
When a USB controller is connected, the Wii-classic controller is Player 2. To use the Wii-Classic as Player 1, unplug the USB controller.
Page last edited October 22, 2025
Text editor powered by tinymce.
