Angled shot of a Software Defined Radio Receiver USB Stick with an IR remote.
Featured
If you've ever been curious about software defined radio (SDR), this USB stick is the easiest way possible to have fun with a powerful, configurable receiver. Packed with the powerful RTL2832U and FC0013 tuner, it can tune into signals from 48.25 - 863.25MHz. That means you can use a...
Out of Stock
Top down view of a white hand touching the display of a PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi.
Featured
Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay so is slightly larger than our popular original. The plate uses the...
Out of Stock
Angled shot of Raspberry Pi Model B+ 512MB RAM
Featured
OMG OMG OMG, did you hear? There's a Raspberry Pi called the Model B+ and check it out...more USB ports, more GPIO, better power supply, four mounting holes, less sticky-out SD card! Yep, that's right, the fantastic engineers at Raspberry Pi HQ have blessed us with a new design....
$29.95 each
In Stock
Angled shot of a Raspberry Pi Model B 512MB RAM.
Featured
Adafruit ships the Raspberry Pi Model B 512MB RAM as of 10/18/2012.The Raspberry PiĀ® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The Raspberry...
No Longer Stocked
5.5" long MCX Jack to BNC RF adapter cable.
Featured
This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to a BNC antenna, this dongle will do the trick!
$5.95 each
In Stock
Close-up of MX to RF connector ends on adapter cable.
Featured
This RF adapter bit is great for anyone doing RF work. If your receiver/transmitter/transceiver has an MCX connector but you really want to tie it to an SMA antenna, this dongle will do the trick!
$4.50 each
In Stock
Top view of PowerBoost 500 Charger connected to a battery and a white iPhone charger charging an iPhone.
Featured
PowerBoost 500C is the perfect power supply for your portable project! With a built-in battery charger circuit, you'll be able to keep your project running even while recharging the battery! This little DC/DC boost converter module can be powered by any 3.7V LiIon/LiPoly battery, and...
Out of Stock
Lithium Ion Polymer Battery 3.7v 2500mAh with JST 2-PH connector
Featured
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of about 10 Wh. If you need a smaller battery,
$14.95 each
In Stock
Angled shot of a USB Battery Pack for Raspberry Pi - 5000mAh - 5V @ 2.1A.
Featured
Discontinued - You can grab USB Battery Pack for Raspberry Pi - 10000mAh - 2 x 5V outputs instead!  A medium-sized rechargeable battery pack for your Raspberry...
No Longer Stocked