Usage
Loading Candy
Lift Franky's hair piece by holding onto the bolts and pulling straight up.
The hair piece can rest on the edge of the head while loading candy into the hooper.
Add Candy to Hooper
Fill the hooper up with candy making sure not to over fill.
The best type of candy to dispense are M&Ms, Jelly beans or Skittles.
Place the hair piece back onto the head, making sure all of the wires are fitted inside the head.
It's ALIVE!
Plug in a USB-C cable with a 5V 1A power support or desktop computers USB hub to power the Feather RP2040 Prop-Maker.
Press the button to dispense candy!
Catch the candies with hands or the included 3D printed tray.
If the candies get stuck in the hopper, give the head a gentle shake to free the candies. If a jam occurs, remove the candies, hooper and cover from the head. Then, free any dislodged treats from the archimedes screw.
Page last edited September 15, 2026
Text editor powered by tinymce.
