Mini FPV monitor

Build a tiny portable FPV (First-person view) monitor! Great to use as a spectator display at an event or attach to your controller as a backup to goggles. It's rechargeable and has access to the band, channel and brightness controls.

The 2.5" TFT display is powered by a 500mAh lipo battery and a PowerBoost 1000C. The Eachine ER32 VRX AV receiver has 32 channels with frequencies from 5645-5945MHz. Small and low cost with a wide voltage input, it connects to the PowerBoost 1000C.

Adafruit Parts

• 2.5" TFT Display
• Powerboost 1000c
• 6mm Slim Buttons
• 500mAh Battery
• Slide Switch
• Eachine ER32 VRX FPV AV Receiver

Tools and Supplies

• 3D Printer + Filament
• Soldering Iron + Solder
• 30AWG Wire
• Helping Third Hands / Panavise
• Heat Shrink
• Mounting Tack
• Wire Stripper / Cutters
• Hobby Knife