Mount the Pots and Jacks

Save Subscribe

You can use the 3D printed front panel as a jig for soldering the passive mixer together.

Insert a potentiometer into the first larger hole on the front panel of the 3D printed case. Secure it with the included nut.

Mount the remaining four potentiometers.

Insert an audio jack into the first smaller hole on the front panel of the 3D printed case. Secure it with the included nut.

Mount the remaining four audio jacks.

 Assembly Wire the Jacks 

This guide was first published on Jan 12, 2022. It was last updated on Jan 12, 2022.

This page (Mount the Pots and Jacks) was last updated on Jan 04, 2022.

Text editor powered by tinymce.