Insert two M3 screws into the two holes at the bottom of the mixer enclosure.

Attach two M3 stand-offs to the M3 screws.

Align the perma-proto board's mounting holes on top of the M3 stand-offs. Secure the perma-proto board with two M3 nuts.

Close the mixer enclosure by snapping the lid onto the main enclosure. Now you're ready to get mixing!

This guide was first published on Jan 12, 2022. It was last updated on 2022-01-12 12:51:04 -0500.

This page (Mount the Perma Proto Board) was last updated on Jan 12, 2022.

Text editor powered by tinymce.