Potentiometer Ground Connections

First, you will connect each pot's stereo ground signals together.

Cut and splice five pieces of solid core wire. Each piece should be approximately 15 mm long.

Bend the wire into a U shape. Bend the spliced ends so that they are sticking out at a 90 degree angle from the U shape bend.

Insert the wire into the potentiometer's two ground pins.

Solder the wire to the potentiometer's two ground pins.

Repeat for the remaining four potentiometers.

This guide was first published on Jan 12, 2022. It was last updated on 2022-01-12 12:51:04 -0500.

This page (Assembly) was last updated on Jan 12, 2022.

Text editor powered by tinymce.