For this project you will need:
- FLORA wearable microcontroller OR Circuit Playground Express
- USB cable - A/MicroB - 3ft
- 5 meters of NeoPixel digital RGB LED strip 30 LED white
- FLORA color sensor (not needed if you're using the Circuit Playground)
- LiPoly rechargeable battery (3.75V 2500mAh)
- micro Lipo battery charger
- tactile switch (not needed if you're using the Circuit Playground)
- stranded wire in three colors
- sharp wire strippers
- sharp flush snips
- needle nose pliers
- soldering iron and solder
- multimeter (for troubleshooting)
- third hand tool
- alligator clips (for prototyping)
- small scissors (manicure style great)
- clear dome umbrella (we used one from Totes)
- 1/4 yd. clear vinyl
- adhesive velcro
- one pack of 4 in. clear cable ties (smallest size)
- Permatex 66B silicone adhesive
