Top down view of a FLORA - Wearable electronic platform: Arduino-compatible connected to 4 alligator clips and a USB powerin the FLORA.
FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA...
$14.95
In Stock
A Black woman's manicured hand holds a round microcontroller with lit up LEDs.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
In Stock
Adafruit NeoPixel Digital RGB LED Strip reel wired to a microcontroller, with all the LEDs in a rainbow
You thought it couldn't get better than our world-famous 32-LED-per-meter Digital LED strip but we will prove you wrong! These...
$84.75
In Stock
USB cable - USB A to Micro-B - 3 foot long
This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or...
$2.95
In Stock
Top down view of a Flora Color Sensor with White Illumination LED - TCS34725.
Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing...
Out of Stock
Lithium Ion Polymer Battery 3.7v 2500mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$14.95
In Stock
Top view of Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1 above a 2-pin JST cable.
Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a...
$5.95
In Stock
Red and black multi-size wire stripplers, closed
These are the finest wire strippers we have used, and if you have to do a lot of wiring, you will agree! They have soft rounded grips - very comfortable to use, and precision ground...
$14.95
In Stock
Red and black diagonal flush cutters
These are the best diagonal cutters, large super-comfortable grip to use and have strong nippers for perfect trimming of wires and leads. I've used my pair every day for years.
$7.25
In Stock
Red and black needle-nose pliers
Simple needlenose pliers for twisting, pulling and pliering your project.
$3.00
In Stock
Third Hand Magnifier with two alligator grabbers and Magnifying Glass
The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This...
Out of Stock
Bundle of Small Alligator Clip Test Leads
Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors....
$3.95
In Stock
Angled shot of 10 12mm square tactile switch buttons.
Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but
$2.50
In Stock
Front cover of Make: Getting Started with Adafruit FLORA. Making wearables with an Arduino-compatible electronics platform. By Becky Stern and Tyler Cooper. Topdown shot of a round dev board wired to LED PCBs.
Making Wearables with an Arduino-Compatible Electronics Platform This book introduces readers to building wearable electronics projects using Adafruit's tiny...
Out of Stock
A collection of electronic parts included in kit.
Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard,...
$89.95
In Stock
A collection of electronic parts included in kit.
Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make...
$39.95
In Stock