Top down view of a FLORA - Wearable electronic platform: Arduino-compatible connected to 4 alligator clips and a USB powerin the FLORA.
FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA...
$14.95
In Stock
Hand holding NeoPixel Ring with 16 x 5050 RGB LED, lit up rainbow
Round and round and round they go! 16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the...
$9.95
In Stock
Angle shot of Flora Wearable Ultimate GPS Module
This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics, designed specifically for use with the Flora...
$24.95
In Stock
USB Cable with Type A and Micro B ends
This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions.
$4.95
In Stock
Angled shot of 10 12mm square tactile switch buttons.
Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but
$2.50
In Stock
Lithium Ion Polymer Battery 3.7v 150mAh with JST 2-PH connector
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
$5.95
In Stock
Top view of Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1 above a 2-pin JST cable.
Oh so adorable, this is the tiniest little lipo charger, so handy you can keep it any project box! Its also easy to use. Simply plug in the gold plated contacts into any USB port and a...
$5.95
In Stock
A collection of electronic parts included in kit.
Get started with the fabulous Adafruit Flora platform with this lovely starter kit. Included are plenty of parts to make a few different fun projects! There's a Flora motherboard,...
$89.95
In Stock
Front cover of Make: Getting Started with Adafruit FLORA. Making wearables with an Arduino-compatible electronics platform. By Becky Stern and Tyler Cooper. Topdown shot of a round dev board wired to LED PCBs.
Making Wearables with an Arduino-Compatible Electronics Platform This book introduces readers to building wearable electronics projects using Adafruit's tiny...
$16.99
In Stock
A collection of electronic parts included in kit.
Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make...
$34.95
In Stock