Each component connects to FLORA main board as follows:

GPS:
  • 3.3V->3.3V
  • TX-> FLORA RX
  • RX-> FLORA TX
  • GND-> GND

Accelerometer:
  • GND-> GND
  • SCL -> SCL
  • SDA -> SDA
  • 3.3V-> 3.3V

NeoPixel ring:
  • Vcc (power)-> FLORA VBATT
  • IN (Data Input)-> FLORA D6
  • Gnd (ground)-> GND

Tactile switch:
  • any two diagonal pins -> FLORA D10 and GND

Battery plugs in via the onboard JST port

This guide was first published on Sep 25, 2013. It was last updated on Sep 25, 2013.

This page (Circuit Diagram) was last updated on Sep 11, 2013.

Text editor powered by tinymce.