You're all set up, and it’s time to test your FLORA.
Connect the FLORA to your computer with a USB cable.
Connect the FLORA to your computer with a USB cable.
On the left drop-down menu select "Adafruit FLORA". On the right menu, choose the port. If the FLORA is the only board connected on your computer, the right port should appear by default.
On Windows, the name of that port should be COMxx. On Linux or Mac OS X, it should be /dev/ttyxxx.
Then click on the "Run on Arduino" button and watch FLORA’s onboard LED blink!
That's it! Your FLORA works and you are ready to start programming it.
Page last edited May 23, 2014
Text editor powered by tinymce.