Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below

Get the most translucent appearance while maintaining strength by setting "Fill gaps between walls" to "Everywhere" Set "Combing Mode" to "Off"

Slice with settings for PLA material. 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed

This guide was first published on Feb 22, 2022. It was last updated on 2022-02-22 13:42:21 -0500.

This page (3D Printing) was last updated on May 19, 2022.

Text editor powered by tinymce.