If Halloween has snuck up on you, have no fear! This project gets you from zero to flapping vampire bat with no soldering required. You'll use a Circuit Playground Express, two servo motors and CircuitPython to build this fun Halloween prop.
The bat's wings are mounted to two servo motors that move up and down to create a flapping effect. The servo motors have alligator clips that attach to the pads on the Circuit Playground Express.
Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and...
$24.95
In Stock
This servo is just like our classic Micro Servo but has 3 alligator clip test leads at the end! This makes it perfect...
$7.95
In Stock
You have a Circuit Playground Express, but you need to mount it to your charming cardboard robot friend, eh? Not so easy if you...
$3.95
In Stock
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also fully reversible! That's right, you will save seconds a day by...
$3.95
In Stock
Here's another addition to our growing family of AA battery holders. Behold! A holder for three (3) AA batteries!...
Out of Stock
Battery power for your portable project! These batteries are good quality at a good price, and work fantastic with any of the kits or projects in the shop that use AAs. This is a pack...
$2.25
In Stock
This project also works with a Circuit Playground Bluefruit if the Circuit Playground Express is not available.
Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've...
$24.95
In Stock
