Angled shot of blue rectangular audio FX sound board.
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a...
$19.95
In Stock
Angled shot of blue rectangular audio FX sound board.
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a...
$14.95
In Stock
Angled shot of an Adafruit Mono 2.5W Class D Audio Amplifier assembled to a speaker and white breadboard.
This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to...
$3.95
In Stock
Thin Plastic Speaker with Wires
Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated...
$1.75
In Stock
Lithium Ion Cylindrical Battery - 3.7v 2200mAh with JST PH connector
Need a big battery for your project? This lithium-ion battery contains a 2200mAh and a protection circuit that provides over-voltage, under-voltage, and over-current protection. Yet,...
$9.95
In Stock
Switched JST-PH 2-Pin SMT Right Angle Breakout Board.
This switched JST connector is the best way to quickly prototype with our LiPoly batteries. We paired a genuine JST connector with a slide switch that can do up to 600mA. Both are...
$2.50
In Stock
Angled shot of 16mm red panel mount pushbutton.
OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it anyways – look at that...
Out of Stock
Angled shot of a white round 16mm illuminated pushbutton.
A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too...
$1.95
In Stock
Adafruit Micro-Lipo Charger for LiPo/LiIon Batt w/MicroUSB Jack connected to battery.
Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project! Simply plug it via any MicroUSB cable into a USB...
Out of Stock