Supported Bluefruit Devices
File Glider is compatible with the following Adafruit Bluefruit devices that include the nRF52840 BLE processor:
Pairing
To pair your board to File Glider, you’ll need to enter discovery mode. To enter discovery mode, you must press the Reset button on your board in a simple pattern. Follow the steps below:
- Press the Reset button on the board.
- You will see the board NeoPixel(s) flash through a series of colors: solid red, a flashing yellow, and a faster-flashing blue.
- When the NeoPixel(s) flashes blue, click the reset button again. That's it!
When done correctly, the LEDs flash yellow, followed by solid blue. Once this occurs, the board will continuously be in discovery mode.
No worries if you don't get it the first time. You can keep trying! Once you are in discovery mode, take a look at the app.
Initially, you should see this on your screen. In this state, the app has not detected your device.
If you need to get the button tap right, keep trying.
Once the device has been discovered, you should see your device shown in the peripherals list. When you're ready, select the board you want to connect to.
Text editor powered by tinymce.
