# Festival Finder Hat with WLED

## Overview

https://youtu.be/TCOM-ofXlk8

Need a way to stand out _and_ help your friends find you in the middle of a festival crowd? This LED arrow hat is equal parts fashion statement and functional beacon. With a vintage diner-sign vibe and bold ball-shaped LEDs around the edge, it points straight at you—because obviously, you're the one they came to see. Mount it on a top hat and you’ve got yourself a wearable sign that says, “There they are!” wherever you go.

This project runs on Adafruit’s [Sparkle Motion Stick](https://www.adafruit.com/product/6332)—an ESP32-based board with a built-in USB plug, perfect for plugging straight into a USB battery. It’s powered by WLED, a brilliantly flexible open-source LED controller that lets you choose dazzling animations, sync with music, and even control it from your phone. Setup is fast, the interface is easy, and the results are way more eye-catching than they have any right to be. Whether you're using it to lead your group through the crowd or just to complete your outfit, this arrow will make you stand out.

![](https://cdn-learn.adafruit.com/assets/assets/000/138/005/medium800/sensors_Arrow_Headband%281%29.jpeg?1751033485)

## Parts
Featured
### Adafruit Sparkle Motion Stick - WLED-friendly USB Stick

[Adafruit Sparkle Motion Stick - WLED-friendly USB Stick](https://www.adafruit.com/product/6332)
The **Adafruit Sparkle Motion Stick** is part of our&nbsp;series of "Sparkle Motion" boards, which are our attempt to make the&nbsp;best small&nbsp;WLED-friendly smart LED driving board in the whole world. Our resident mermaid, <a...></a...>

Out of Stock
[Buy Now](https://www.adafruit.com/product/6332)
[Related Guides to the Product](https://learn.adafruit.com/products/6332/guides)
![Video of a Black hand turning an LED reel on and off with a driver board.](https://cdn-shop.adafruit.com/product-videos/640x480/6332-00.jpg)

Featured
### Adafruit NeoPixel LED Ball Shape Pixel Strand - 20 LEDs

[Adafruit NeoPixel LED Ball Shape Pixel Strand - 20 LEDs](https://www.adafruit.com/product/5984)
Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little orbs of color? Use these...

In Stock
[Buy Now](https://www.adafruit.com/product/5984)
[Related Guides to the Product](https://learn.adafruit.com/products/5984/guides)
![Video of ball LED strand lighting up rainbow colors.](https://cdn-shop.adafruit.com/product-videos/640x480/5984-00.jpg)

Featured
### Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long

[Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long](https://www.adafruit.com/product/3892)
For those who are fans of our silicone-covered wires, but are always looking to _up their wiring game_. We now have **Silicone Cover Ribbon cables!** These may look _a lot_ like <a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/3892)
[Related Guides to the Product](https://learn.adafruit.com/products/3892/guides)
![Coiled bundle of black, silicone covered, stranded-core ribbon cable.](https://cdn-shop.adafruit.com/640x480/3892-01.jpg)

## Additional Materials & Tools

- 1/8" rigid poster board (or download our file for 3d printing or laser cutting)
- Hot glue gun
- Stylish hat

I also used a band saw and a drill press to shape the poster board, but you could do it with a sharp knife and a [5/8" leather punch](https://www.amazon.com/IRISFLY-10pcs-Leather-Hollow-Gasket/dp/B01L9CTMWE/ref=sxin_17_pa_sp_search_thematic_sspa?content-id=amzn1.sym.2da95b6c-f59a-4699-bc43-d0ff036c6388%3Aamzn1.sym.2da95b6c-f59a-4699-bc43-d0ff036c6388&crid=1D5LJ8Z6XFLMQ&cv_ct_cx=5%2F8%22+leather+punch&keywords=5%2F8%22+leather+punch&pd_rd_i=B01L9CTMWE&pd_rd_r=8bafe9f2-8bba-4d8a-abe7-0dc780dce7f7&pd_rd_w=aPdUI&pd_rd_wg=EbqDl&pf_rd_p=2da95b6c-f59a-4699-bc43-d0ff036c6388&pf_rd_r=VXT2ZAVVB8R9V6ACFJN4&qid=1750871875&sbo=RZvfv%2F%2FHxDF%2BO5021pAnSA%3D%3D&sprefix=5%2F8+leather+punc%2Caps%2C180&sr=1-2-6024b2a3-78e4-4fed-8fed-e1613be3bcce-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9zZWFyY2hfdGhlbWF0aWM&psc=1).

# Festival Finder Hat with WLED

## WLED Installation

This page will guide you through how to install WLED on the Sparkle Motion Stick and connect a NeoPixel strip to test it.

Featured
### Adafruit NeoPixel Digital RGB LED Strip - Black 30 LED 1m

[Adafruit NeoPixel Digital RGB LED Strip - Black 30 LED 1m](https://www.adafruit.com/product/2552)
You thought it couldn't get better than [our world-famous 32-LED-per-meter Digital LED strip](http://adafruit.com/products/306) but we will prove you wrong! These NeoPixel strips have 30 digitally-addressable pixel LEDs per meter and are very affordable and are only 12.5 mm...

In Stock
[Buy Now](https://www.adafruit.com/product/2552)
[Related Guides to the Product](https://learn.adafruit.com/products/2552/guides)
![Angled shot of lit RGBW LED strip on a reel.](https://cdn-shop.adafruit.com/640x480/2552-00.jpg)

## USB Serial Driver Update

The Sparkle Motion Stick has a USB to serial chip which may need a driver installed before you can install WLED. Head over to the [How to Install Drivers for WCH USB to Serial Chips](https://learn.adafruit.com/how-to-install-drivers-for-wch-usb-to-serial-chips)&nbsp;tutorial, and download and install the new driver.

## Pre-Release Version of WLED
At this time, the Sparkle Motion Stick works best with 0.16 -- the IR receiver is not supported in WLED 0.15. This should be fixed in the next release of WLED.

If you **don't** need to use the IR receiver, you can proceed with the default installation steps after this section.

To use the IR receiver now, the following combined .bin file can be used. Get it by downloading this zip file:

[esp32_bootloader_v4_WLED_0.16.0-alpha_ESP32](https://cdn-learn.adafruit.com/assets/assets/000/134/984/original/esp32_bootloader_v4_WLED_0.16.0-alpha_ESP32.zip?1738630454)
To install, extract the .bin file from the zip and then follow the same&nbsp;[ESB Web Flasher process used for installing CircuitPython](https://learn.adafruit.com/adafruit-sparkle-motion-stick/install-circuitpython#connecting-to-the-web-flasher-3125650). At the "Programming the Board" step, choose the .bin file and leave offset as 0x0.

## Install WLED

These next steps require a **_Web Serial_-compatible browser**. As of this writing, that means **Google&nbsp;Chrome** , **Microsoft Edge, Firefox 151** or **Opera** “desktop” browsers. Other browsers (Safari, older versions of Firefox, Explorer and&nbsp;_anything_ mobile) won’t work.

Visit [https://install.wled.me/](https://install.wled.me/)

Plug your microcontroller into your computer with a known good USB cable. Click "Install" and select the port for your board.

Depending on the USB-to-serial bridge chip on the board, you might see one _or two_ serial ports. On Mac, for instance, there might be both “/dev/cu.usbmodem[number]” _and_ “/dev/cu.wchusbserial[number]”. Use the “ **wchusbserial** ” one.

![adafruit_products_Install_WLED.jpg](https://cdn-learn.adafruit.com/assets/assets/000/115/287/medium640/adafruit_products_Install_WLED.jpg?1663802069)

After successful installation, enter your WiFi network name and password when prompted. This must be a **2.4 GHz** WiFi network; ESP32 does not support 5 GHz networks. If it can’t connect, then as a fallback WLED will create its own 2.4 GHz WiFi access point.

![led_strips_Install_WLED.jpg](https://cdn-learn.adafruit.com/assets/assets/000/134/601/medium640/led_strips_Install_WLED.jpg?1737574345)

If you don't see the "Connect to Wi-Fi" prompt, you'll need to set up your WiFi network using AP (access point) mode.&nbsp;Open up your WiFi settings and look for a WiFi network called&nbsp;`WLED-AP`. Connect to this network&nbsp;using the default password&nbsp;`wled1234`. The WLED interface will pop up in its own browser.

From here, go into Config/Wifi Settings and enter your WiFi credentials near the top. Give your project a name in the mDNS field a little further down the page. Now you can type in "projectname.local" (where "projectname" is your mDNS name) into any web browser on the same wifi network to access your microcontroller.

You can also scan the QR code below to open access point mode.&nbsp;

For more help and troubleshooting tips visit the [Getting Started page on the WLED knowledge base.](https://kno.wled.ge/basics/getting-started/)

![led_strips_install_no_wifi.jpg](https://cdn-learn.adafruit.com/assets/assets/000/134/597/medium640/led_strips_install_no_wifi.jpg?1737574050)

![led_strips_WLED_wifi_settings.jpg](https://cdn-learn.adafruit.com/assets/assets/000/134/598/medium640/led_strips_WLED_wifi_settings.jpg?1737574103)

![](https://cdn-learn.adafruit.com/assets/assets/000/134/599/medium800/led_strips_WLED-QR-Connect-WB.png?1737574151)

## Setup & Preferences
### WiFi&nbsp;Setup

Head to the **WiFi Setup** screen under Config and create a good URL so you can control your project from any web-enabled device. Call it something you'll remember, that's easy to type into any web browser on your WiFi network in order to connect to your project.

In Safari or Chrome on your phone or computer, type in this web address to access the WLED interface: [http://projectname.local](http://projectname.local)&nbsp; (where "projectname" is whatever you put into this field).

Check out the Additional Settings page for more info on accessing your project. WLED has an "access point mode" that doesn't require a WiFi network for when you're out on the go. It's also helpful to download one of the WLED apps to help manage and organize your projects.

![adafruit_products_wled_config.jpg](https://cdn-learn.adafruit.com/assets/assets/000/115/288/medium640/adafruit_products_wled_config.jpg?1663802411)

![led_strips_adafruit_products_WiFi_Settings_generic.jpg](https://cdn-learn.adafruit.com/assets/assets/000/131/679/medium640/led_strips_adafruit_products_WiFi_Settings_generic.jpg?1722624553)

## Wiring

You'll connect a NeoPixel strip to pin 21 on the Sparkle Motion Stick.

- **NeoPixel Din** to **Sparkle Motion 21 (blue wire)**
- **NeoPixel +5V** to **Sparkle Motion 5V (red wire)**
- **NeoPixel GND** to **Sparkle Motion GND (black wire)**

![fritzing diagram with neopixels](https://cdn-learn.adafruit.com/assets/assets/000/136/993/medium640/adafruit_products_wledNeo.jpg?1747770203)

## LED Setup

Next, head to the&nbsp; **LED Preferences** &nbsp;tab under the&nbsp; **Config menu**.

Scroll down to&nbsp; **Hardware Setup**. Put your total number of LEDs into the **&nbsp;Length** &nbsp;field, and change GPIO to 21 for your Sparkle Motion Stick. Make sure to select the correct&nbsp; **Color Order** &nbsp;for your LEDs as well.

![hardware setup](https://cdn-learn.adafruit.com/assets/assets/000/136/992/medium640/adafruit_products_Screenshot_2025-05-16_155359.jpg?1747769946)

## Use It
![adafruit_products_WLED_interface.jpg](https://cdn-learn.adafruit.com/assets/assets/000/115/394/medium800/adafruit_products_WLED_interface.jpg?1667150591)

Now you can use any computer or handheld device to control your LEDs.&nbsp;

Make sure your device is on the same WiFi network as your board. Navigate to your custom URL (projectname.local/ ) in a web browser. You'll see a color picker above a whole bunch of color palette choices.

Choose a color, choose an effect, and watch your lights animate and glow!

Save your favorite combinations as presets, create playlists, control the speed and intensity of the animations, and lots more. This web app is incredibly intuitive and easy to use.

Head over to the WLED wiki at [https://kno.wled.ge/](https://kno.wled.ge/) to delve into all the particulars.

## Troubleshooting

_If your lights didn't come on, here are a few things to try:_

1. Head back to WLED and check your pinout configuration under LED Preferences. Be sure the pin number is the correct GPIO for the attachment point you used.
2. Check your wiring! Be sure you connected to the IN end of the LED strip. These strips can be inconsistent so this is a pretty common problem. Use an [alligator clip](https://www.adafruit.com/product/1008) to try connecting the data wire on the other end (the power and ground wires should work from either end).
3. Try re-uploading the WLED software.&nbsp;
4. If the lights come on but you can't control them: i.e. you type in "projectname.local" into your browser and it won't connect, make sure you're on the correct WiFi network. If you're on a different network than the one you set up the sofware on, you won't see the WLED connection.
5. If your lights came on in blue or green instead of yellow, your color order is wrong. See below to fix.
6. If only half your lights came on, be sure you've got the correct number in the "length" field under LED preferences.
7. If your lights came on in a variety of weird colors and looking like a 1950s diner interior, you may have the wrong LED strip type selected. RGBW strips and RGB strips are not the same, so be sure you've got the correct strip type or you'll get very odd behavior.
8. If your microcontroller hangs or keeps rebooting, or gets really hot, you may have the power and ground lines switched. Unplug right away and check: this is a fast way to brick your controller.

# Festival Finder Hat with WLED

## Electronics Assembly

![](https://cdn-learn.adafruit.com/assets/assets/000/137/949/medium800/led_pixels_arrowhead_bb-2-2.jpg?1750874474)

The board plugs directly into your USB battery—super cool. I added a long ribbon cable so the battery and board could live in my pocket or a hat while the arrow is on my head. Then I added a JST connector so I can unplug everything easily.

The light strand already has a JST connector on the “out” end, which I planned to use—but it turns out these lights are **directional**. You have to plug into the **in** end, or they won’t light up. I accidentally plugged into the out end, so I had to cut the connector off and reattach it to the in end, making sure the wire orientation was correct. After that, the lights came on!

Pro tip: it’s hard to tell which end is “in” and which is “out.” For this strand, the **male connector** was on the in end, so if I had followed that clue from the beginning, I would’ve saved some time.

Check out the video at the beginning of this guide for a full build walk-through.

![](https://cdn-learn.adafruit.com/assets/assets/000/137/980/medium800/sensors_Arrow_Headband.jpeg?1750888792)

# Festival Finder Hat with WLED

## Build the Arrow

![](https://cdn-learn.adafruit.com/assets/assets/000/137/952/medium800/led_pixels_Printable_Arrow_Template.jpg?1750874995)

I designed the arrow template in&nbsp; **Tinkercad** , so it’s ready for laser cutting or 3D printing. Download the appropriate file below if this is your jam.

[Arrow_Lighted_Sign.svg](https://cdn-learn.adafruit.com/assets/assets/000/137/974/original/Arrow_Lighted_Sign.svg?1750884512)
[Arrow_Lighted_Sign.stl](https://cdn-learn.adafruit.com/assets/assets/000/137/975/original/Arrow_Lighted_Sign.stl?1750884522)
[Printable_Arrow_Template.jpg.zip](https://cdn-learn.adafruit.com/assets/assets/000/137/953/original/Printable_Arrow_Template.jpg.zip?1750875042)
Since my 3D printer was down, I just printed the template onto paper and cut it out of 1/8” poster board. I used a bandsaw to cut both layers, then drilled the holes using a drill press with a 5/8" bit. Be sure to clean the bit frequently and use a spoil board so the holes come out clean on the back side.

&nbsp;

![](https://cdn-learn.adafruit.com/assets/assets/000/137/981/medium800/sensors_arrow_cut.jpg?1750889065)

Info: Be sure to wear eye and use safety practices when using sharp tools

Once the shape was cut and painted sparkly red, I added the lights. Since they’re directional, I didn’t want to just toss them in randomly. I used tiny rubber bands (from the dollar store) to manage the cables and ensure even spacing. Then I hot-glued all the lights in place.

![](https://cdn-learn.adafruit.com/assets/assets/000/137/982/medium800/sensors_lights-rubberbands.jpg?1750889092)

![](https://cdn-learn.adafruit.com/assets/assets/000/137/983/medium800/sensors_hotglue.jpg?1750889111)

At first, I tried to attach the arrow to a halo-style headband to make it float above my head, but that didn’t quite work. Eventually, I attached it to a **top hat** using a fancy elastic band from a costume shop. Inside the hat, I taped the battery and Sparkle Motion board to the top—maybe not the cleanest solution, but it worked and didn’t damage the hat.

![](https://cdn-learn.adafruit.com/assets/assets/000/137/984/medium800/sensors_hat_done.jpg?1750889154)

# Festival Finder Hat with WLED

## WLED Presets

When you first power up your lights, the colors might not match what you expect—clicking yellow might give you blue, for instance. This just means the color order needs adjusting. Go to&nbsp;_Config → LED Preferences_, and under **Color Order** , change it to **RGB**. That should fix it!

![](https://cdn-learn.adafruit.com/assets/assets/000/137/954/medium800/led_pixels_LED_Settings.jpg?1750875179)

Let’s make our first preset. Start with a solid color—click a color button and watch the lights change. Fun, right? But even better, you can use **animations**. For this project, I love the **Chase** animation. You can customize it with different foreground and background colors, adjust speed and width, and more. When you like what you see, go to the _Presets_ tab, click _Create New_, give it a name (like “Red and White”), and click _Save_.

![](https://cdn-learn.adafruit.com/assets/assets/000/137/986/medium800/sensors_applyatboot.jpg?1750889329)

There’s also a checkbox for **Apply at Boot** —this lets the animation run automatically every time the project turns on.

Want to level up? Create a **playlist** of presets! Set durations, transitions, and shuffle settings, and let your arrow cycle through animations all night with no extra work.

![](https://cdn-learn.adafruit.com/assets/assets/000/137/985/medium800/sensors_audioreactive.jpg?1750889252)

Finally, let’s make the project **sound reactive**. Go to the [Sparkle Motion Guide and find the **pinout diagram**](https://learn.adafruit.com/adafruit-sparkle-motion-stick/pinouts). It shows you that the onboard [I2S microphone](https://learn.adafruit.com/adafruit-sparkle-motion-stick/pinouts#i2s-microphone-3198467) uses GPIO pins 12 (WS), 13 (data), and 14 (clock). Go back to WLED, open _Config → User Mods_, and enable the **Audio Reactive** mod. Enter the pin numbers from the diagram, click _Save_, and reboot the board.

Once it restarts, you’ll see some effects with little music notes next to them—that means they react to sound! Play around and enjoy the reactive light show.

I really hope you enjoyed this project. If you make one, let me know in the comments—I’d love to see it!&nbsp;


## Guide Products

### Adafruit Sparkle Motion Stick - WLED-friendly USB Stick

[Adafruit Sparkle Motion Stick - WLED-friendly USB Stick](https://www.adafruit.com/product/6332)
The **Adafruit Sparkle Motion Stick** is part of our&nbsp;series of "Sparkle Motion" boards, which are our attempt to make the&nbsp;best small&nbsp;WLED-friendly smart LED driving board in the whole world. Our resident mermaid, <a...></a...>

Out of Stock
[Buy Now](https://www.adafruit.com/product/6332)
[Related Guides to the Product](https://learn.adafruit.com/products/6332/guides)
### Adafruit NeoPixel LED Ball Shape Pixel Strand - 20 LEDs

[Adafruit NeoPixel LED Ball Shape Pixel Strand - 20 LEDs](https://www.adafruit.com/product/5984)
Attaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little orbs of color? Use these...

In Stock
[Buy Now](https://www.adafruit.com/product/5984)
[Related Guides to the Product](https://learn.adafruit.com/products/5984/guides)
### Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long

[Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long](https://www.adafruit.com/product/3892)
For those who are fans of our silicone-covered wires, but are always looking to _up their wiring game_. We now have **Silicone Cover Ribbon cables!** These may look _a lot_ like <a...></a...>

In Stock
[Buy Now](https://www.adafruit.com/product/3892)
[Related Guides to the Product](https://learn.adafruit.com/products/3892/guides)
### USB Battery Pack - 2200 mAh Capacity - 5V 1A Output

[USB Battery Pack - 2200 mAh Capacity - 5V 1A Output](https://www.adafruit.com/product/1959)
A smaller-sized rechargeable battery pack for your&nbsp;[Raspberry Pi](http://www.adafruit.com/raspberrypi)&nbsp;or [Raspberry Pi B+](https://www.adafruit.com/product/1914)&nbsp;(or&nbsp;[Arduino](http://www.adafruit.com/arduino), or&nbsp;<a...></a...>

No Longer Stocked
[Buy Now](https://www.adafruit.com/product/1959)
[Related Guides to the Product](https://learn.adafruit.com/products/1959/guides)

## Related Guides

- [Adafruit Sparkle Motion Stick](https://learn.adafruit.com/adafruit-sparkle-motion-stick.md)
- [Perfect Pitch Machine](https://learn.adafruit.com/perfect-pitch-machine.md)
- [Bluefruit Luminary Lanterns with Capacitive Touch](https://learn.adafruit.com/bluefruit-luminary-lanterns-with-capacitive-touch.md)
- [Monster Matrix with WLED](https://learn.adafruit.com/monster-matrix-with-wled.md)
- [WLED 16: What's New](https://learn.adafruit.com/wled-16-what-is-new.md)
- [Voicebox FX](https://learn.adafruit.com/voicebox-fx.md)
- [Christmas Soundboard with NeoTrellis M4](https://learn.adafruit.com/xmas-sound-board.md)
- [Chinese Dragon Puppet with Motion-Reactive Flame Effect](https://learn.adafruit.com/chinese-dragon-puppet-with-motion-reactive-flame-effect.md)
- [NeoPixel Infinity Cube](https://learn.adafruit.com/neopixel-infinity-cube.md)
- [Screaming Cauldron](https://learn.adafruit.com/screaming-cauldron.md)
- [Close Encounters of the MIDI NeoPixel Visualizer Kind](https://learn.adafruit.com/midi-neopixel-visualizer.md)
- [Make It Glow: How to Solder NeoPixels, A Beginner's Guide](https://learn.adafruit.com/make-it-glow-how-to-solder-neopixels-a-beginners-guide.md)
- [Matrix Portal RGB Display Handbag](https://learn.adafruit.com/matrix-portal-rgb-display-handbag.md)
- [Light-Up Costumes in Harsh Environments](https://learn.adafruit.com/light-up-costumes-in-harsh-environments.md)
- [MIT Green Building NeoPixel Tetris](https://learn.adafruit.com/tetris-building.md)
- [Paper-Craft Crystal Gem Lantern](https://learn.adafruit.com/paper-craft-crystal-gem-lantern.md)
