3D Printing

Save Subscribe

Parts List

STL files for 3D printing are oriented to print "as-is" on FDM style machines. Parts are designed to 3D print without any support material. Original design source may be downloaded using the links below.

Slice with settings for PLA material. 


The parts were sliced using CURA using the slice settings below.

  • PLA filament 220c extruder
  • 0.2 layer height
  • 10% gyroid infill
  • 60mm/s print speed
  • 60c heated bed
3d_printing_hero-case-2.jpg
 Overview Assemble 

This guide was first published on Jan 25, 2022. It was last updated on Jan 25, 2022.

This page (3D Printing) was last updated on Jan 24, 2022.

Text editor powered by tinymce.