3D Printed Enclosure

Make a snap fit case for the Feather RP2040 Scorpio! It features openings for the USB, battery and 2x8 header. 

Tabs allow the case to be secured to a number of different surfaces. A slot in the bottom of the case allows for wires to pass through. The top cover features openings for the 12 and 16 header pins. 


Angled video of eight LED strips fanned like a curtain emitting red fiery shades.
If there is one thing Adafruit is known for, its mega-blinky-fun-rainbow-LEDs. We just love sticking NeoPixels anywhere and...
In Stock
Black Nylon Screw and Stand-off Set with M2.5 Threads, kit box
Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker...
In Stock
Angled shot of coiled pink and purple USB cable with USB A and USB C connectors.
This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers, and...
In Stock

This guide was first published on Jan 24, 2023. It was last updated on Mar 08, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.