The diagram below provides a general visual reference for wiring of the components once you get to the Assembly page. This diagram was created using the software package Fritzing.

Adafruit Library for Fritzing

Adafruit uses the Adafruit Fritzing parts library to create circuit diagrams for projects. You can download the library or just grab individual parts. Get the library and parts from GitHub - Adafruit Fritzing Parts.

Wired Connections

• The NeoPixels, Speaker, and Green button are each connected to pins on the screw block terminal
• Rotary and Display plug into the STEMMA port
• Slide Switch connect to the EN and GND Pin on the Feather
• Power for the Button LEDs connect to 3V Pin on the Feather
• Red Button connects to D13 Pin

Use JST and Jumper cables to easily connect components.

Determine switch pins vs. LED pins button

Solder a 220Ω resistor in-line with the + Pin (3v Power)