To make the project described in this tutorial, you will need the following:

beaglebone_bbb.jpg

BeagleBone Black

beaglebone_rgb_cc_10mm_web.jpg

Diffused 10mm RGB LED common cathode or common anode

beaglebone_R-470-level.jpg

R-470-level.jpg

3 x appox. 470Ω resistors - you can use 220Ω to 1KΩ

beaglebone_breadboard_half_web.jpg

Half-sized Breadboard

beaglebone_jumpers_web.jpg

Male to male jumper leads

This guide was first published on Jul 09, 2013. It was last updated on Jul 09, 2013.

This page (You will need) was last updated on Jul 09, 2013.

Text editor powered by tinymce.