There are two routes for assembly: we can either put a laser pointer on top of the servo and tape the button to turn it on, or we can disassemble it and solder some leads on it so it can be controlled by the Metro. 

This wiring is for the first option (non-controlled laser).

This wiring is for the laser controlled by the IR Remote. We are controlling the laser by sending it a voltage from Pin #13.

This guide was first published on Aug 18, 2017. It was last updated on Jun 12, 2017.

This page (Wiring) was last updated on Jul 31, 2017.

Text editor powered by tinymce.