Watching a riveting show while on a stationary bike is a good way to motivate yourself to exercise more regularly. There was even a scientific study done about it, which coined the term “temptation bundling”. But sometimes, the show might get way too interesting and you might not even notice that you've stopped cycling!

This project creates a device that can detect simple movement, and when it detects that you've stopped moving, it will pause any videos or music playing on your Apple mobile device (iPad, iPhones, etc.). It's an exercise buddy that will remind you to keep moving so you can keep watching!


Angled shot of Adafruit LED Glasses Driver.
This board is designed to be a thin, bluetooth-enabled driver board for our Adafruit LED Glasses RGB LED matrix. That said, it's...
In Stock
Slim Lithium Ion Polymer Battery 3.7v 400mAh with JST 2-PH connector and short cable
Lithium-ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light, and powerful. The output ranges from 4.2V when completely charged to 3.7V. This...
Out of Stock
1 x Velcro strap
Any velcro strip with a hook side and a loop side will do.
1 x 3D printing filament
Pick your favorite PLA filament! This is the one I used for this project

This guide was first published on Feb 14, 2022. It was last updated on Jun 19, 2024.

This page (Overview) was last updated on Mar 08, 2024.

Text editor powered by tinymce.