EMC2101 Fan Controller and Temperature sensor Python Docs

EMC2101 Fan Controller and Temperature sensor

Temperature based air circulation? I'm a fan!

Image for user siddacious
by Bryan Siepert
published December 15, 2020, last edited November 24, 2025
posted in Adafruit Products Sensors/ Temperature & Humidity Breakout Boards/ Motor Controls
Save Link Note Download
38
Beginner
Product guide

Python Docs

Page last edited October 27, 2020

Text editor powered by tinymce.

 Python & CircuitPython Additional Features 
Related Guides
A solder fume extractor with a fan is connected to a FunHouse microcontroller displaying air quality sensor data. A soldering iron emits smoke nearby.
FunHouse IoT Fume Extractor and Air Quality Sensor
By Liz Clark
intermediate
88
Compact breakout board featuring a 15 pin D-sub connector which fits vintage PC joysticks. Labeled pins for GND, SDA, SCL, and UPDI. Two white STEMMA QT I2C connectors are on the sides.
Adafruit PC Joystick to seesaw I2C Adapter
By Liz Clark
beginner
1
LED-illuminated jellyfish lantern with glowing tentacles and a reflective, multicolored backdrop. The lights change colors dynamically.
WiFi Jellyfish Lantern with WLED
By Erin St Blaine
beginner
30
Monster M4sk Dual LCD screens display red eyes, mounted on a circuit board with a connected Grid Eye IR sensor. Wires extend from the setup for power and data.
Monster M4sk Is Watching You
By Timothy Weber
intermediate
37
A blue air quallity sensor with a multi-colored wire harness connected to a small green PCB with pin headers. The sensor has a vented casing.
PM2.5 Air Quality Sensor
By lady ada
beginner
59
Small white 3D-printed sensor enclosure with blue LED glowing through vent slots, USB-C cable plugged into bottom and placed over seedling peat pellets in a black tray.
No-Code Seedling Frost Alert Device with Adafruit IO...
By Brent Rubell
beginner
2
New
A Adafruit Feather RP2040 microcontroller board with a USB-C port, JST connector, STEMMA QT I2C connector and GPIO pins is shown.
Introducing Adafruit Feather RP2040
By Kattni Rembor
beginner
173
Small black ENS161 MOx gas sensor STEMMA breakout with gold-plated mounting holes and two 4-pin JST connectors. Labeled through-holes for VIN, 3Vo, GND, SCK, SDO, SDI, CS and an INT pin below the surface-mounted sensor die.
Adafruit ENS161 MOX Gas Sensor
By Liz Clark
beginner
2
A breadboard setup with a solenoid lock, microcontroller, FET transistor and wires connecting to a small display. Red, blue, and yellow wires link components.
Remote controlled door lock using a fingerprint...
By M. Schwartz
beginner
119
A breadboard setup with a 4-digit 7-segment display showing "70.0", connected to a USB to serial interface via jumper wires along with a blue sensor board.
Adafruit FT232H With SPI & I2C Devices
By Tony DiCola
intermediate
15
A hand holds a blue Adafruit Trinket microcontroller with white text, a micro USB port, a small black button and labeled pins for connections.
Introducing Trinket
By lady ada
beginner
200
Blue breakout board featuring the MCP9600 I2C Thermocouple Amplifier with white labeled pins for SDA, SCL, VCC, GND, and space for a terminal block to connect a thermocouple. 2 mounting holes.
Adafruit MCP9600 I2C Thermocouple Amplifier
By Kattni Rembor
beginner
17
Three LED flowers glow in blue, yellow, and red hues against a dark background, showcasing vibrant light diffusion.
Glowing Hair Flowers with n00ds
By Erin St Blaine
intermediate
8
A small black rectangular VL53L0X Time-of-Flight distance sensor breakout board with labeled pins: GND, VIN, SDA, SCL, XSHUT, and GPIO. Features four mounting holes, a central sensor, and two STEMMA QT I2C connectors.
Adafruit VL53L0X Time of Flight Micro-LIDAR Distance...
By lady ada
intermediate
70
A microcontroller board with a SIM card and antenna is connected to a lithium polymer battery. The board features various components and ports and has a connected green antenna.
Adafruit FONA 800 Shield
By lady ada
intermediate
19
Search

Search

Categories