Overview — image 2 of 2

details

That's why we designed the Adafruit USB Type C CC Resistor Fixer, a collab between our sunken USB socket and USB Plug breakout.

This small PCB assembly fits onto a cable or into the mis-designed port. It passes through the two data pins and the Vbus and Ground power lines, while adding the missing 5.1K resistors on the port side and a power LED.

Note that the USB plug pinout doesn't carry the sideband wires or the high speed pins, so this is good for USB charge/sync but not for high speed or specialty protocols. If you're not sure, then it's very unlikely you need them: those products aren't going to mess up the CC resistors.

Back

Search