Build the Coffee Scale — image 1 of 4

force___flex_scale_assmb-8548.jpg
details

Attach Plates

In an attempt to make a minimal scale to integrate with the espresso machine's drip tray, only two pieces of aluminum, the load cell, and a few fasteners are used.

The fixed end of the load cell (the side with the wires) is tapped with M5 screw holes, while the weighing end that can flex is tapped with M4.

Using an M4 screw, attach the large cross-plate to the underside of the load cell. (Note the sticker on the end of the cell with the load rating and arrow.)

Then, attach the 3-hole coupling plate with an M5 screw to the underside of the load cell at the fixed end.

Back

Search