Build the Chromakey Light Ring — image 1 of 8

projects_chring-0400.jpg
details

Fasteners

The blocks are held in place with nylon M3 fasteners which will keep them secure but still allow them to slide and grip the lens barrel.

Place the eight short screws through the mounting holes from the front side of the ring.

Thread the eight standoffs onto the protruding short screws.

Use the eight long screws to screw the four 3D printed blocks into their standoffs.

The screw and standoff lengths are such at they should not prevent the blocks from sliding even when the screws are tight.

Back

Search