Pico Keyboard Assembly — image 6 of 6

raspberry_pi_picokb-0229.jpg
details

Add Switches to Plate

You'll need to push the keyswitches through the switchplate before mounting and soldering them to the PCB.

Orient the plate with the Pico cutout on the left and the reset switch cutout in the proper upper position.

Orient the keyswitches to match the PCB -- pins at the bottom.

Push the keyswitches through from the top of the plate, being sure they click satisfyingly into place. Careful about applying too much force to the acrylic or it can break.

Back

Search