Explore
Groups to get your gears turning
The spot where the delicate fairy light wires go into the resin is very, very vulnerable. I was letting my Circuit Playground dangle while I messed around with the resin, and the light strand broke right off.
This happened to me TWICE with this project. The first time, both strands broke and I gave the project up for lost. The second time, just one strand broke and I was able to dig the second wire out of the resin using a soldering iron (sporting a tip I don't care about). I carefully melted the resin around the wire, then scraped it out and was able to re-solder the broken wire. I reinforced it with a plug of hot glue and am now being extremely careful lest it break again.