Make the Crystals — image 1 of 1

led_pixels_20_foldhole.png
details

Each crystal cuts in two pieces, with a rectangular hole for the NeoPixel strand wires to poke through. 

Crease all the fold-lines and tabs. The edges with the NeoPixel wire hole are not scored, because I wanted to make them sturdier, but you'll need to fold those as well. Line up the tabs on either side of the hole segments and crease to the point of the crystal.

This is more easily shown in the video at the beginning of this guide, so take another look if you can't figure it out.

Insert the tabs from the outside in, so they end up on the interior of the crystal.

Back

Search